CPU
Interface and connectivity
PHY
 
HOME > Product > Interface and connectivity > UARTs > SC16C752BIB48,151
 
 

SC16C752BIB48,151

Product Code : -
( Unit : U.S dollar )
1~99
100~499
500~999
1000~
price per box
quantity per box
3.44
RoHS : -
Stock : Inquiry quantity
Application : COMMON
Call TEL. +82-2-3397-3613
 
 
 
*5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs


*General description

The SC16C752B is a dual Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s (3.3 V and 5 V). The SC16C752B offers enhanced features. It has a Transmission Control Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO Rdy register, the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.

The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and receives characters on the RX signal. Characters can be programmed to be 5 bits, 6 bits, 7 bits, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities.

The SC16C752B is available in plastic LQFP48 and HVQFN32 packages.

 
*Features
  • Pin compatible with SC16C2550 with additional enhancements
  • Up to 5 Mbit/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is 3 Mbit/s)
  • 64-byte transmit FIFO
  • 64-byte receive FIFO with error flags
  • Programmable and selectable transmit and receive FIFO trigger levels for DMA and interrupt generation
  • Software/hardware flow control
    • Programmable Xon/Xoff characters
    • Programmable auto-RTS and auto-CTS
  • Optional data flow resume by Xon any character
  • DMA signalling capability for both received and transmitted data
  • Supports 5 V, 3.3 V and 2.5 V operation
  • 5 V tolerant on input only pins
  • Software selectable baud rate generator
  • Prescaler provides additional divide-by-4 function
  • Industrial temperature range (-40 Cel to +85 Cel)
  • Pin and software compatible with SC16C752, TL16C752
  • Fast data bus access time
  • Programmable Sleep mode
  • Programmable serial interface characteristics
    • 5-bit, 6-bit, 7-bit, or 8-bit characters
    • Even, odd, or no parity bit generation and detection
    • 1, 1.5, or 2 stop bit generation
  • False start bit detection
  • Complete status reporting capabilities in both normal and Sleep mode
  • Line break generation and detection
  • Internal test and loopback capabilities
  • Fully prioritized interrupt system controls
  • Modem control functions (CTS, RTS, DSR, DTR, RI, and CD)
 
 
 
Delivery

1. The initial delivery day shall be the day following the day on which the product is forwarded to the delivery service.
1) Regular home-delivery (excluding order date and holidays): Seoul/Gyeonggi 3~5days, other regions 3~8days
2) Postal service: Seoul/Gyeonggi 3~5days
2. During public holidays and weekends, there will be no delivery, and any other days during which delivery is impracticable due to a force majeure event may cause delay in the delivery.
3. The buyers both within and outside of Korea shall be responsible for any delivery fee that may arise. But the products bought over 300,000 won will be delivered free of charge.

Cancellation and Refund

1. The buyer may cancel the purchase order before the product is shipped, and if the product is in the process of being delivered, transaction shall be handled pursuant to the Article 15 of products return.
2. If the product is on standby for delivery after the payment, the buyer may cancel the order at any time except for the particular circumstances.
3. If credit card has been used for the payment, the payment shall immediately be refunded as soon as the cancellation process is completed. If cash has been used for the payment, the payment shall be refunded in 5 business days via direct account transfer or others.

Return and Exchange

1. The buyer may demand a return of the product within three days after the receipt of the delivery.
2. The cost for the return delivery shall be borne by the liable party.
3. The payment of refund upon return of the product shall be completed within 5 days after the Company has received the product from the buyer.
4. The Company shall refund, return and exchange in accordance with the buyer’s demand in the following cases. Such transaction shall be processed within 10 days after the delivery.
1) Delivered product does not match with the purchase order.
2) Delivered product is lost or damaged due to the Company’s error.
3) Delivery is considerably delayed than what has been scheduled.
4) Otherwise, legitimate reasons are submitted to the Company for the demand by the buyer.

Delivery/Returned goods/Exchange Address

Guro branch : 3127, Ma-Dong, Central Distribution Complex, 1258, Guro-Dong, Guro-Gu, Seoul, Korea, 152-721
TEL : +82-2-2681-5517(REP)
FAX : +82-2-2681-5518
Support: +82-2-3397-3613
E-mail : shop@semidj.com

Overseas Delivery Service

1. The Company provides the service in accordance with the overseas delivery procedure of the products whose trade contract is already signed through the overseas delivery network that has business connection with the Company. Overseas delivery is divided into as follows:
1) A domestic delivery phase: until the buyer’s product is delivered to a logistics center of a third party in business cooperation with the Company
2) An overseas delivery phase: until the product is delivered to the recipient through the overseas delivery network
2. For overseas delivery, the buyer’s order may be cancelled depending on the status of the delivery request. Return requested due to change of mind during delivery is limited to the phase of domestic delivery. Once the product has completed the domestic delivery phase and entered the overseas delivery phase, a return is not permitted unless the Company approves return or exchange due to an original defect in the delivered product.
3. A buyer requesting the Company’s approval on return or exchange must approve the original product defect or other grounds for return or exchange by submitting to the Company objective evidence. The costs and expenses for the delivery in connection with the return or exchange shall be paid by the Company once objective evidence has been approved.
4. The buyer who has received an approval to return or exchange of the product from the Company shall contact the DJmall customer center before the return of the product, including documents to verify costs and expenses for the delivery.
5. If the estimated cost of the delivery paid at purchase is greater than the actual delivery cost, the difference will be refunded to the buyer.
6. If the estimated cost of the delivery paid at purchase is less than the actual delivery cost, the buyer must make an additional payment to complete the delivery. If the difference is not paid within 3 months despite of continuous notice, the product may become the Company’s own property.
7. In the event of using overseas delivery service, the recipient is liable for all customs, taxes, duties and other cost imposes by the country to which the delivery is made.
'BUYER IS RESPONSIBLE FOR THE DELIVERY FEE'