**Features

High-Performance Floating-Point DSP
   - TMS320C32-60 (5 V)
     33-ns Instruction Cycle Time
     330 Million Operations Per Second (MOPS), 60 Million Floating-Point Operations Per Second
     (MFLOPS), 30 Million Instructions Per Second (MIPS)
   - TMS320C32-50 (5 V)
     40-ns Instruction Cycle Time
     275 MOPS, 50 MFLOPS, 25 MIPS
   - TMS320C32-40 (5 V)
     50-ns Instruction Cycle Time
     220 MOPS, 40 MFLOPS, 20 MIPS

32-Bit High-Performance CPU

16-/32-Bit Integer and 32-/40-Bit Floating-Point Operations

32-Bit Instruction Word, 24-Bit Addresses

Two 256 × 32-Bit Single-Cycle, Dual-Access On-Chip RAM Blocks

Flexible Boot-Program Loader

On-Chip Memory-Mapped Peripherals:
   - One Serial Port 
   - Two 32-Bit Timers
   - Two-Channel Direct Memory Access (DMA) Coprocessor With Configurable Priorities

Enhanced External Memory Interface That Supports 8-/16-/32-Bit-Wide External RAM for Data
   Access and Program Execution From 16-/32-Bit-Wide External RAM

TMS320C30 and TMS320C31 Object Code Compatible

Fabricated using 0.7 um Enhanced Performance Implanted CMOS (EPIC^TM) Technology by
   Texas Instruments (TI^TM)

144-Pin Plastic Quad Flat Package (PCM Suffix) 5 V

Eight Extended-Precision Registers

Two Address Generators With Eight Auxiliary Registers and Two Auxiliary Register Arithmetic
   Units (ARAUs)

Two Low-Power Modes

Two- and Three-Operand Instructions

Parallel Arithmetic Logic Unit (ALU) and Multiplier Execution in a Single Cycle

Block-Repeat Capability

Zero-Overhead Loops With Single-Cycle Branches

Conditional Calls and Returns

Interlocked Instructions for Multiprocessing Support

One External Pin, PRGW, That Configures the External-Program-Memory Width to 16 or 32 Bits

Two Sets of Memory Strobes (STRB0\ and STRB1\) and One I/O Strobe (IOSTRB\) Allow Zero-
   Glue Logic Interface to Two Banks of Memory and One Bank of External Peripherals

Separate Bus-Control Registers for Each Strobe-Control Wait-State Generation, External
   Memory Width, and Data Type Size

STRB0\ and STRB1\ Memory Strobes Handle 8-, 16-, or 32-Bit External Data Accesses (Reads
   and Writes)

Multiprocessor Support Through the HOLD\ and HOLDA\ Signals Is Valid for All Strobes

Datasheet :

Delivery

1. The initial delivery day shall be the day following the day on which the product is forwarded to the delivery service.
1) Regular home-delivery (excluding order date and holidays): Seoul/Gyeonggi 3~5days, other regions 3~8days
2) Postal service: Seoul/Gyeonggi 3~5days
2. During public holidays and weekends, there will be no delivery, and any other days during which delivery is impracticable due to a force majeure event may cause delay in the delivery.
3. The buyers both within and outside of Korea shall be responsible for any delivery fee that may arise. But the products bought over 300,000 won will be delivered free of charge.

Cancellation and Refund

1. The buyer may cancel the purchase order before the product is shipped, and if the product is in the process of being delivered, transaction shall be handled pursuant to the Article 15 of products return.
2. If the product is on standby for delivery after the payment, the buyer may cancel the order at any time except for the particular circumstances.
3. If credit card has been used for the payment, the payment shall immediately be refunded as soon as the cancellation process is completed. If cash has been used for the payment, the payment shall be refunded in 5 business days via direct account transfer or others.

Return and Exchange

1. The buyer may demand a return of the product within three days after the receipt of the delivery.
2. The cost for the return delivery shall be borne by the liable party.
3. The payment of refund upon return of the product shall be completed within 5 days after the Company has received the product from the buyer.
4. The Company shall refund, return and exchange in accordance with the buyer’s demand in the following cases. Such transaction shall be processed within 10 days after the delivery.
1) Delivered product does not match with the purchase order.
2) Delivered product is lost or damaged due to the Company’s error.
3) Delivery is considerably delayed than what has been scheduled.
4) Otherwise, legitimate reasons are submitted to the Company for the demand by the buyer.

Delivery/Returned goods/Exchange Address

Guro branch : 3127, Ma-Dong, Central Distribution Complex, 1258, Guro-Dong, Guro-Gu, Seoul, Korea, 152-721
TEL : +82-2-2681-5517(REP)
FAX : +82-2-2681-5518
Support: +82-2-3397-3613
E-mail : shop@semidj.com

Overseas Delivery Service

1. The Company provides the service in accordance with the overseas delivery procedure of the products whose trade contract is already signed through the overseas delivery network that has business connection with the Company. Overseas delivery is divided into as follows:
1) A domestic delivery phase: until the buyer’s product is delivered to a logistics center of a third party in business cooperation with the Company
2) An overseas delivery phase: until the product is delivered to the recipient through the overseas delivery network
2. For overseas delivery, the buyer’s order may be cancelled depending on the status of the delivery request. Return requested due to change of mind during delivery is limited to the phase of domestic delivery. Once the product has completed the domestic delivery phase and entered the overseas delivery phase, a return is not permitted unless the Company approves return or exchange due to an original defect in the delivered product.
3. A buyer requesting the Company’s approval on return or exchange must approve the original product defect or other grounds for return or exchange by submitting to the Company objective evidence. The costs and expenses for the delivery in connection with the return or exchange shall be paid by the Company once objective evidence has been approved.
4. The buyer who has received an approval to return or exchange of the product from the Company shall contact the DJmall customer center before the return of the product, including documents to verify costs and expenses for the delivery.
5. If the estimated cost of the delivery paid at purchase is greater than the actual delivery cost, the difference will be refunded to the buyer.
6. If the estimated cost of the delivery paid at purchase is less than the actual delivery cost, the buyer must make an additional payment to complete the delivery. If the difference is not paid within 3 months despite of continuous notice, the product may become the Company’s own property.
7. In the event of using overseas delivery service, the recipient is liable for all customs, taxes, duties and other cost imposes by the country to which the delivery is made.
'BUYER IS RESPONSIBLE FOR THE DELIVERY FEE'